The table below shows the width and length tolerances for our AZ31B magnesium tooling plate. Please note that the tolerances allow for excessive width and length but not for undersize plate.
The data are based on standards developed by the Aluminum Association and ANSI as well as information from our suppliers.
| Specified Width Or Length In Inches | |||||
| > 10 | > 48 | > 72 | |||
| <= 10 | <= 48 | <= 72 | |||
| Specified Thickness | Tolerances Plus Only In Inches | ||||
| > 0.250 | <= 6.000 | 0.1875 or 3/16 | 0.375 or 3/8 | 0.500 or 1/2 | 0.625 or 5/8 |